FXP Backplane with 8 slots for 3U units
FXPBPL-01M-PCB - Backplane for FXP Platform
|
Backplane with 8 Pi-U slots for FXP-based platforms. Backplane has switchable V(I/O) 2.5 or 3.3 V and programmable system clock frequency 33/66 MHz or reference sourced.Features- Interface: FXP;
- N of slots: 8;
- System clock: 33/66 MHz;
- I/O voltage: 2.5/3.3 V.
|
|
Read more...
|
I/Q Modulator 4 – 7 GHz
AVM7-01M-RF - I/Q Modulator
|
Wideband quadrature modulator (RF Vector Modulator) has three inputs – I, Q cannels and LO input, and one output – RF. This modulator has internal multi-path output filtering block and AGC-controlled output level. Device control is implemented by means of SPI interface. In conjunction with DVM plug-in unit (baseband generator) and synthesizer as a local oscillator quadrature I/Q modulator forms vector signal generator.Features- RF output frequency range: 4 – 7 GHz;
- Baseband: 300 MHz;
- RF output level range: -10..+10 dBm;
- Output filtering.
|
|
Read more...
|
RF Vector Modulator 100 MHz – 4 GHz
AVM4-01M-P3U4HP220E - I/Q Modulator Plug-in Unit
|
Quadrature modulator plug-in unit (RF I/Q Modulator) with output frequency range from 0.1 to 4 GHz based on AVM RF-block (see “IF/RF Blocks – I/Q Modulators” section). It is designed for use in FXP platforms. I, Q, LO (suffix “E”) inputs and RF output are located on front panel.Features- RF output frequency range: 100 MHz – 4 GHz;
- AGC-controlled output level: -10..+10 dBm;
- Baseband: 300 MHz;
- RF output multi-path filtering block;
- Control interface: FXP;
- Form-factor: Pi-U 3U 4HP 220mm.
|
|
Read more...
|
|
<< Start < Prev 1 2 3 Next > End >>
|
|
Page 3 of 3 |
