|
VG4-01M-C42HP3U375A - Vector Signal Generator |
|
|
Vector Signal Generator up to 4 GHz
VG4-01M-C42HP3U375A - Vector Signal Generator
| RF vector generator is used for generation of the signal in form Re[(I(t)+jQ(t))ejωt], fwhere I(t) and Q(t) – sampled interval of quadrature signals (i.e. complex signal), written in device memory, ω – carrier frequency. On the front panel all intermediate signals are available for user – i.e. I and Q channels, local oscillator (LO) and output signal RF. Vector signal generator is controlled via USB port of a personal computer.Features- RF output frequency range: 0.1 – 4 GHz (in vector mode), 62.5 – 8 GHz (in scalar mode);
- RF output level tuning range: -10..+10 dBm (in vector mode), -30..+0 dBm (in scalar mode);
- Modulation types: QAM, PM, FM and all its modifications;
- Baseband: 66 MHz;
- Hardware interpolation: up to 4096;
- Hardware NCO with 32-bit phase and frequency control;
- Hardware phase and frequency digital modulation;
- Control interface: USB 2.0.
|
Read more...
|
AVM7-01M-RF - I/Q Modulator |
|
|
I/Q Modulator 4 – 7 GHz
AVM7-01M-RF - I/Q Modulator
| Wideband quadrature modulator (RF Vector Modulator) has three inputs – I, Q cannels and LO input, and one output – RF. This modulator has internal multi-path output filtering block and AGC-controlled output level. Device control is implemented by means of SPI interface. In conjunction with DVM plug-in unit (baseband generator) and synthesizer as a local oscillator quadrature I/Q modulator forms vector signal generator.Features- RF output frequency range: 4 – 7 GHz;
- Baseband: 300 MHz;
- RF output level range: -10..+10 dBm;
- Output filtering.
|
Read more...
|
|
FXPBPL-01M-PCB - Backplane for FXP Platform |
|
|
FXP Backplane with 8 slots for 3U units
FXPBPL-01M-PCB - Backplane for FXP Platform
| Backplane with 8 Pi-U slots for FXP-based platforms. Backplane has switchable V(I/O) 2.5 or 3.3 V and programmable system clock frequency 33/66 MHz or reference sourced.Features- Interface: FXP;
- N of slots: 8;
- System clock: 33/66 MHz;
- I/O voltage: 2.5/3.3 V.
|
Read more...
|
SG8-HP01M-C2U42HP315 - RF Signal Generator |
|
|
RF Signal Generator 10 MHz — 8 GHz, +28 dBm
RF Signal Generator 10 MHz - 8 GHz, +28 dBm
|
SG8 series generator is all-purpose continuous wave RF source with phase or frequency analog modulation support. Generator has OLED display and keyboard. Control interfaces: RS-232, USB. Control protocol: SCPI. Distinctive Features- High output power
- Arbitrary reference frequency
- Small dimensions
- Low-cost
|
Read more...
|
|
|
|
<< Start < Prev 1 2 Next > End >>
|
Page 1 of 2 |