This section contains RF Signal generator modules based on plug-in units (Pi-U), designed for use in platforms. Basic parameters are listed in the table below. - RF-block on which Pi-U is based;
- Base PCB for Pi-U (the board providing data and control interface between RF-block and backplane);
- Pi-U dimensions:
- width, HP (1HP=5.08 mm or 0.2 in);
- height, U (1U=44.45 mm or 1.75 in);
- depth, mm.
Pi-U Based RF Signal GeneratorsProduct | Base RF Block | Base PCB | Form factor | Description | | LNO-HP01M-P3U4HP220E | LNO-HP02M-RF | FXPUPI-01RF-PCB | 3U 4HP 220mm | Pi-U Based RF Signal Generator 62.5 MHz - 8 GHz up to +20 dBm for FXP Platform (front panel with Ext Ref IN connector) | | LNO-LP01M-P3U4HP220E | LNO-LP01M-RF | FXPUPI-01RF-PCB | 3U 4HP 220mm | Pi-U Based RF Signal Generator 62.5 MHz - 8 GHz up to +20 dBm for FXP Platform (front panel with Ext Ref IN connector) |
|
