|
DCL176-F02M-RF - L-Band Down Converter |
 |
 |
L-Band Down Converter for Satellite communications
L-Band Down-converter (top view)
|
Features- RF input frequency range: 950 – 2150 MHz;
- Signal bandwidth: 16 MHz;
- IF output: 176 MHz;
- Output 3-rd order intercept point (OIP3): +25 dBm;
- Image rejection: 56 dB.
Pricing and AvailabilityPrice1, (@ qty.) | Stock qty.2 | Time3 | 1 | >1 | Delivery | Production | $740 | call | 0 | — | 1.5–2 mon. |
- It’s a guiding price, for more information contact us.
- Only discrete parts quantity is shown (some of the devices may be already included in other systems as a part), for more information contact us.
- Delivery time — if product is available in the stock, production time — otherwise.
Product componentsItem | Components | Qty. | Description | 1 | DCL176-F02M-RF | 1 | Frequency down-converter with extended L-band (950-2150 MHz) input range for satellite communications. Receiver is very stable to the influence of the sideband disturbance signals of high power |
Accessories№ поз. | Компоненты | Кол-во | Описание | 1 | RS2SPI-01M-PCB | 1 | Board for RF-block with SPI-interface control via PC RS-232 port | 2 | RF Debug Application | 1 | Software application for RF-blocks control via PC COM-port. Application has open source as it is written on Tcl/Tk and is used for easy learning of SPI control commands for particular RF-block, and for further integration of the block into user’s own complete system |
Notes: accessories are not included in the product above, they should be ordered separately.
L-Band Down-converter (bot view)
|
Specification| Parameter | Conditions | Value | Unit | | min | max | RF Input & General Characteristics | | RF Input Frequency Range | | 950 | 2150 | MHz | | Gain | | 27 | 33 | dB | | Gain Flatness | Fin=950-2150 MHz | | 2 | dBp-p | | Nominal Input Impedance | | 50 | Ohm | | Input VSWR | | | 2.0 | | | Noise Figure | | | 2 | dB | | IF Output Characteristics | | Sideband Suppression | | 56 | | dB | | Carrier Suppression | | 75 | | dB | | IF Port Bandwidth | -3 dB Cutoff | 16 | | MHz | | Output IP3 | | +25 | | dBm | | Output P1dB | | +10 | | dBm | | Gain Flatness | over 10 MHz IF Bandwidth | | 1 | dBp-p | | Reference Port Characteristics | | Frequency | | 10 | MHz | | Nominal Input Impedance | | 50 | Ohm | | Input VSWR | | | 1.2 | | | Input Power | | 3 | 9 | dBm | | Programming Interface (SPI, LVTTL 3.3V, 5V tolerant) | | Vih | | 2.0 | 5.5 | V | | Vil | | -0.5 | 0.8 | V | | Clock Frequency | | | 1 | MHz | | Power Supply | | +5VA Supply Voltage Current | in range+5.0 to +5.5 V | | 0.7 | A | | +5VA Supply Voltage Ripple | | | 50 | mVp-p | | Dimensions | | Length | excluding F connector | | 146.5 | mm | | Width | | | 60 | mm | | Height | | | 22 | mm |
|
|
|
