RAN-01M-C310W54H350 - RF Vector Analyzer Print

RF Vector Analyzer 9 kHz – 2 GHz

RAN-01M-C310W54H350 - RF Vector Analyzer RAN-01M-C310W54H350 - RF Vector Analyzer
RF Vector Spectrum Analyzer with input frequency range 9 kHz – 2 GHz and USB control interface. It is used in spectrum or vector analysis of the signal, sampled data acquisition in complex form (I and Q channels), and further data processing.

Device is supposed to be applied in satellite and relay communications as the tool for monitoring of the air. Also it can be useful for debugging and automated testing of RF products.

Features
  • Noise Figure (NF): <3 dB;
  • Gain range: >80 dB;
  • RF input range: 9 kHz – 2 GHz.
Specification
ParameterConditionsValueUnit
minmax

RF Input & General Characteristics

RF Input Frequency Range 0.0092000MHz
Input Power @10MHz BW-80+10dBm
Gain Flatnessdigital compensation "on" 3dBp-p
Nominal Input Impedance 50Ohm
Input VSWR  2.0 
Noise Figure  3dB
IF Output Characteristics
Sideband Suppression 40 dB
I/Q Port Bandwidth-3 dB Cutoff each port18 MHz
Input IP3 +25 dBm
Gain Flatnessover 20 MHz IF Bandwidth 1dBp-p
Internal Reference Characteristics (OCXO)
Frequency 10MHz
Temperature Stability ±1.5x10-8 
PC Interface
USB 2.0    
Throughput   27 MBps
Acquisition
Internal RAM  4MB
Sampling Rate each port  65MHz 
Resolution  12  bit
Power Supply
Supply Voltage  180240VAC
Dimensions
Length  350mm
Width  310mm
Height  54mm

RAN-01M-C310W54H350 - RF Vector Analyzer RAN-01M-C310W54H350 - RF Vector Analyzer